New front end with Input sensitivity down to 2mV

 

New low noise front end can go down to 2mV per division with DC temperature stability.

 

 

 

Function generator option output on CH3/Aux port.

 

 

Based on Direct Digital Synthesis, Screenscope's integrated Function Generator supports Sine, Square, Triangular and Pulse outputs. It is capable of Sweep and burst modes with variable amplitude and offset.

 

An easy to use control panel provides the Function Generator front panel. It has the same single mouse click or scroll functionality to minimise movements required to change settings. Settings also have a quick set capability; just sellect the decade range of the number variable you want to adjust with the mouse left and right buttons, then scroll to and fro to increment or decrement the value in by the decade position amount.

 

 

 

 

 

Specifications    
Waveforms   Sine
    Square
    Triangular
    Pulse
     
Modes   Continuous Wave
    Sweep
    Burst
     
Output Impedance 50 Ohm
  Protection Short circuit protected
  Offset range -2.20 to +2.20 V
     
Sine Feq Range 3 Hz - 10 MHz
  Flattness 0.2dB to 9MHz
  Harmonics 0 - 900 KHz < -55 dBm
    900KHz to 9MHz < -45 dBm
     
  Output Levels 0.10 - 7.4 V ppk open / 3.7V ppk into 50 Ohm
  Accuracy +-2%
     
     
Triangular Feq Range Freq Range 3 Hz - 1 MHz
  Output Levels 0.10 - 7.4 V ppk open / 3.7V ppk into 50 Ohm
  Accuracy +-2%
     
     
Square, Pulse Feq Range 3 Hz - 7 MHz with sweep and burst capability
    7 - 10 selected frequencies
    Rise Time <14nS (at 1V into 50 Ohm)
    Edge Jitter 1 MHz - 7 MHz < 1nS
    <100 KHz 20nS
  Output Levels 0.14 - 4.2V ppk open / 2.1V ppk into 50 Ohm
  Accuracy +- 2%