- 58MHz real-time typical bandwidth
- 240 MSPS, low phase noise clock source
- 2 x 8 bit, 1 x 1 bit channel input
- Display 1024 x 768 with large trace area
- Excellent with wide screen monitors
- Click, drag, scroll mouse GUI operation
- FFT in dBVrms, dBm(50, 75, 100, 300 600 Ohm termination) with selectable window
- Math functions +, - , x,
- X-Y mode
- Unique Chart record/logger mode on slow timebases displays samples immediately
- Chart record mode can log continuous screen runs to a file on USB
- Auto measure includes Vppk, Vmag, Vrms, Vave, Period, Frequency,T rise, T fall, FFT
- peak Mag and freq
- Manual measurement markers with readouts
- Attenuator ranges 2mV/Div to 5V/div 1 Div = 75 vertical pixels)
- Large DC offset volts relative to signal range
- Timebase ranges 3.3nS/Div to 1 hour/div(1 Div = 80 pix horizontal)
|
- FFT rate approx 50 traces per second
- Sinx/x interpolation
- Trigger source: Ch1, Ch2, Ch3(Aux)
- Trigger positive or negative edge or pulse width
- Trigger point can be up to 1 million samples before capture
- Trigger out(Aux)
- 4 non volatile trace memory displays
- Trace memories can be loaded with a single click from Channel, Math, FFT or USB memory
- Trace memories can be saved to USB in text, csv or Screenscope native formats
- Full screenshot can be saved as bmp file
- USB host with virtual keyboard for easy filename entering
- Simple upload of new scope revision
- Control states saved and re-established on power-up for continuity of operation
- Inputs 1M 20pf
- CAT I environment
|